[Jason]

Bit late on this...

Readme

IntelBurnTest v1.6
by AgentGOD
----------------------------

Home Page: -=]Ultimate-Filez.com[=- {Revolution}
Donation : -=]Ultimate-Filez.com[=- {Revolution}

Description:
Linpack by Intel(R) is an extremely stressful program that will
put even the most powerful X86/X64 CPU in the world at its knees. Load temp
under Linpack will be up to 22*C higher than the competing software Prime95.
This program will make usage of Linpack easier and more practical.

Keep in mind, use this program at your own risk. By using this program, you
agree that neither I nor Intel shall be responsible for including, but not
limited to: burned up CPU, fried motherboard, spontaneous room temperature
increase, hair loss, or mental stress.

Benefits of using Linpack:
1. More accurate than Prime95 Small FFTs/Blend.
2. Takes less time to tell if your CPU/RAM is unstable than Prime95 (usually
something like 8 minutes Linpack vs 40 hours under Prime95).
3. Use the same stress-testing engine that Intel uses to test their products
before they are packed and put on shelves for sale.

Benefits of using IntelBurnTest:
1. Simplifies usage of Linpack.
2. Direct output of results to the screen.
3. Simplifies the process of selecting a test size to use.
4. Better appearance.

How to test CPU and RAM stability (summarized):
1. It is best to use a 64-bit OS with the 64-bit mode for the most accurate
test result.
2. Use the most available RAM possible (IntelBurnTest can now do this on
its own automatically). The more memory it uses, the more accurate.
3. Select the run # (should use at least 5).
4. Start running. Output should look something like this (unless if error detection is on*):
Size LDA Align. Time(s) GFlops Residual Residual(norm)
10000 10000 4 15.979 41.7337 1.012665e-010 3.570760e-002
10000 10000 4 15.119 44.1087 1.012665e-010 3.570760e-002
10000 10000 4 15.216 43.8254 1.012665e-010 3.570760e-002
NOTE: Depending on the memory size selected, the testing size will be
different, so the Residual(norm) values will not be the same if you
ran this test each time with different amounts of memory selected.
5. Above indicates that the test ran fine so far without instability, but
below indicates instability (the Residual(norm) values aren't the same
throughout running the test):
Size LDA Align. Time(s) GFlops Residual Residual(norm)
10000 10000 4 15.245 43.7434 1.525878e-005 5.380399e+003
10000 10000 4 15.250 43.7303 2.460366e-010 8.675501e-002
10000 10000 4 15.162 43.9816 1.012665e-010 3.570760e-002
NOTE: Instability doesn't necessarily have to happen at the beginning, it
can happen in the middle, or at the end. It could be just ONE of
them that is inconsistent, but that DOES indicate instability. It is
highly recommended to use the most free memory possible for the most
accurate, and quick test. BSOD or freezing are signs of instability
as well.

* If error detection is on, the program will only output the results at the end of the
run, and give a conclusion about whether or not your PC is stable. If it is off,
you will see similar output as above during the testing.


Credits:
--------
AgentGOD - Coding this program, duh
Cronos (from XS) - for the original the memory size equation
mikeyakame (from XS) - for notifying me of newer binaries
WoZZeR999 (from XS) - memory size suggestion
krille (from XS) - for the constructive criticisms
Intel - for Linpack and a Core 2(tm) Quad processor

IntelBurnTest, Copyright © 2008 Ultimate-Filez. Linpack, Copyright © Intel(R) Corporation.

Download link:
http://www.ultimate-filez.com/files/IntelBurnTest.zip

Native 64-bit version for WinPE
http://www.ultimate-filez.com/files/...rnTest-x64.zip

Screen-shot:

[Blackmirror]

Could it be dangerous Jason?
On a heap like mine

[Jason]

If you don't overclock your system, then you don't need to use this. You need an Intel processor too, in your case you don't.

Basic OC guide: First time Overclocker? Read this first.
Advanced OC guide: overclocking guide - EXTREME Overclocking Forums

This will cause extreme stress to your CPU -- so if don't want to buy any new parts right now, then don't even bother overclocking. It also depends on what cooling you have -- you definitely need adequate cooling.

NOTE: Temps will be higher than when using prime95. This really does push it.

[Blackmirror]

Overclocking . something i have never ever tried

[Joshuashawharvey]

I think i'll stick to Prime95 small FFTs

[Jason]

Yup.

Would be pretty good with water cooled systems -- stress it even more.

[Joshuashawharvey]

Well I don't overclock (anymore), but I do undervolt, so the same procedures apply in ensuring my system is stable. I just get a cooler, more energy efficient, prolonged-life computer rather than an overkill power-hungry system that will last for 6 months